Huawei/Battery - How can I configure specific battery charging and discharging periods?

To configure your Huawei inverter for specific charging and discharging periods, you need to change the operation mode to 'TOU'.

TOU (time-of-use)
- In this mode, TOU (time-of-use) is selected. You can manually set the charge and discharge time segments. For example, you can allow the grid to charge batteries in low electricity price periods at night and discharge batteries during high electricity price periods, saving electricity fee. The charge from grid function must be enabled.
- At least 1 charging and discharging timeslot needs to be configured.
- A maximum of 14 time segments can be set.
- In some countries, the grid is not allowed to charge batteries. Therefore, this mode cannot be used.
 
Below is a guide to charge your battery via the FusionSolar app. Please note, it can typically either be done by going into the Dongle or Battery in the device tab.
 
To update TOU configuration the latest version of the FusionSolar app, you want to enter Devices:

Then enter into your Dongle device:

Click on the three dots in the top right hand corner:

Enter into Parameter Settings:

Then you can select the TOU operation mode and enter your charge and discharge periods:

 
If you cannot update it via entering the Dongle device, please click on the link 'Connected Devices' in your inverter device.
The follow the same path mentioned above, clicking the three dots in the top right corner and into parameter settings.